How To Use The Hydro Level

How To Use The Hydro Level
How To Use The Hydro Level

Video: How To Use The Hydro Level

Video: How To Use The Hydro Level
Video: How to use a water level - the diy basics 2024, March
Anonim
How to use the hydro level
How to use the hydro level

The hydraulic level is, in fact, an ordinary rather thin hose or tube, necessarily transparent. Commercial kits have flasks with a measuring scale at the ends of the hose, but in general, craftsmen do without them, sometimes using ordinary medical syringes or plastic bottles. As you can imagine, such a device is quite inexpensive, it is not a problem to just buy a transparent hose and use it as a meter. And it's very easy to make a hydro level with your own hands.

How to use the hydro level
How to use the hydro level

Yes, now many people prefer laser levels, because it is a much more modern instrument. But you won't be able to use the laser level during the day and outdoors! The batteries in a modern device have run out - that's it, work has stopped. And the water level does not need anything other than ordinary water. No electronics to fail. Moreover, the indicators are quite accurate.

How to use the hydro level
How to use the hydro level

The hydraulic level operates on the basis of the law on Pascal's communicating vessels, known to all schoolchildren. It states that in communicating vessels, the levels of the same, homogeneous liquid will be equal. Indeed, the water in the hydraulic level hose or tube flattens out and shows a horizon that can be used to create even horizontal lines.

How to use the hydro level
How to use the hydro level

Use the water level in the following cases:

  • To mark the walls for mounting shelves.
  • In the process of leveling the floor.
  • Installation of the screed.
  • For installing a stretch ceiling.
  • Pasting walls with wallpaper.
How to use the hydro level
How to use the hydro level

The design of the hydro level is so simple that everyone can learn to use it.

Important! There should be no air bubbles in the tube or hose with water! Otherwise, all measurements will be in error. So fill the hose with water very carefully, you can act as if you were draining gasoline from the tank of a car. It is advisable to stretch the hose or tube before use.

How to use the hydro level
How to use the hydro level

Several secrets of using the hydro level:

  1. The inside of the hose must be clean, so you can first use a soapy solution for rinsing, and only then use regular water for measuring.
  2. Water should be taken at room temperature, because too cold or warm liquid can cause an error.
  3. It is not necessary to climb up to mark the level under the ceiling. You can select a point perpendicular to the eyes and mark the level around the perimeter. Then a regular tape measure is used to select the distance to the ceiling.
  4. Water level marks should be placed on both sides of the corner.
  5. If the work is carried out in winter, outdoors or in an unheated room, then the water in the hose may freeze or simply give an error due to the low temperature. Some builders advise using in this case pure alcohol, vodka or non-freeze. However, it will often be enough to add salt, because you remember, again, from the school physics course, that salt water freezes worse at lower temperatures.
  6. When working with a water level on a putty in bright sunlight, clear water can give glare, it is difficult to see the level. In this case, you can add a little coffee or tea, unsweetened to the hose as a dye. Then the hose will have to be flushed.
How to use the hydro level
How to use the hydro level

As you can see, there are no special difficulties when working with the hydro level. The device is really simple, reliable, independent of external conditions and the availability of an energy source. Note that it is more convenient to use the water level together, so call an assistant for accurate measurements.

Recommended: