Hammer Test

Table of contents:

Hammer Test
Hammer Test

Video: Hammer Test

Video: Hammer Test
Video: ХАММЕР H2. САМЫЙ ЧЕСТНЫЙ ТЕСТ ДРАЙВ. Анти-ТестДрайв 2024, March
Anonim
  • Bahco 428-13
  • Brigadier 41-314
  • CK 4221-16
  • Habero 600 IH 500
  • Kapriol 10360
  • Kraftool 20270
  • Matrix 10330
  • Practa 300-711031
  • RemoСolor 38-3-304
  • Stanley Steelmaster 51031
  • Stayer 450 g
  • Wiha 800-02094-1
  • Craton 2-15-01-07

Bahco 428-13

Joiner's claw hammer

image
image

PURPOSE: hammering and extraction of nails; other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; surface polishing; hardening of working surfaces. Striker: round.

HANDLE: material - fiberglass (fiberglass); rubber pad.

WEIGHT: hammer - 580 g; head - 370 g.

FEATURES: Ribbed rubber pad.

MANUFACTURER'S RANGE: carpentry nail hammers with wooden (hickory), fiberglass or metal handle; straightening hammers with plastic or metal strikers; roofer hammers.

CONSUMER ANALYSIS

The hammer head is forged from high quality tool steel. Only the working surfaces are individually hardened - the striker and the edges of the nailer. The area between them is left softer and more elastic.

The head contour is in the shape of an arc from the sharpened ends of the nailer to the striker. This allows you to pull out the fastener twice as long as using a tool rounded to the "window" - the point of connection with the handle.

The handle is made of fiberglass - a durable material that absorbs impact and does not rot or rust. The grooved rubber pad makes the instrument "grippy" - it sits in the palm "like a glove". The bright orange color of the handle will prevent the hammer from getting lost among other tools.

In the upper part - the attachment area with the head - there is a special wedge pressed into the handle material under high pressure. The strength of such a connection is beyond doubt.

SUMMARY: a hammer for professionals, comfortable and safe to use. Reliable "soldering" of the head and handle, durability of the materials used - everything speaks of readiness for prolonged "battles". The fiberglass handle dampens recoil in the palm, so you can work without fatigue for a long time. The rubber pad does not "polish" and does not allow the hand to slip.

Brigadier 41-314

Locksmith hammer

image
image

PURPOSE: locksmith work; hammering and other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - special steel; technology - forging; coating - anticorrosive phosphating; hardening of working surfaces. Main firing pin: square.

HANDLE: material - hickory.

WEIGHT: head - 500 g.

FEATURES: ring wedge; covering the attachment point with epoxy; non-slip varnished handle.

MANUFACTURER'S ASSORTMENT: locksmith hammers with a wooden handle (head weight 100, 200, 300 or 500 g); carpentry nail hammers; roofer hammers; bricklayer's hammers; all-metal hammers; other models.

CONSUMER ANALYSIS

This hammer is not surprising with unique solutions, but the technology and material make it a durable, trouble-free worker.

Forged head made of quality high-carbon tool steel, hardened at both ends. The central part is left quite "elastic". Thanks to such "tricks" the firing pin will not crumble or flatten (not "bloom"), and the head will not burst due to the stresses arising at the junction with the handle. The protective coating applied by phosphating protects the metal from corrosion more reliably than conventional paint.

The wood from which the handle is made is hickory. Due to its special fiber structure, this breed has unique vibration damping characteristics and excellent strength. The handle is fastened with an annular wedge. Its advantages over a simple (flat) part is that it tightly fixes the head, evenly distributing the force over the entire surface of the bore. The gaps between the fastened parts are kept to a minimum. On top of this "knot" is filled with epoxy, which prevents the wood from drying out and tightly fixes the wedge.

SUMMARY: reliable, comfortable and durable model. Suitable for both simple work in the country, and for daily professional use.

CK 4221-16

Joiner's claw hammer

image
image

PURPOSE: driving and pulling out nails; other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; polishing of metal surfaces; hardening of working surfaces. Striker: round.

HANDLE: material - steel; coating - epoxy resins; transparent rubber pad.

WEIGHT: hammer - 774 g; head - 454 g.

FEATURES: all-metal construction; grooved surface of the rubber pad.

MANUFACTURER'S ASSORTMENT: carpentry nail hammers with metal or wooden handle (head weight 227, 454 or 568 g); locksmith hammers with a wooden handle (head weight 454 g); bricklayer's hammers of different types.

CONSUMER ANALYSIS

Rhetorical question: "Why does S. K's product always stay in good working order?" There are three main reasons: quality steel, forging and work surface hardening. The striker and the nailer are treated separately: they become harder than the rest of the metal part. This difference is also needed so that the head does not split from heavy loads.

The nailer has sharp ends and is sharpened from the inside. This is convenient when you need to pull out a nail that is tightly embedded in the product. The "extractor" cuts two parallel grooves in the surface and "sits in" the cap - all that remains is to use the handle as a lever.

This model is one of the few made from a solid metal blank. Differences from other brands are in the technology of "dressing" the handle - in S. K it is not processed, that is, it is not polished. This is not necessary - the steel shaft of the handle is coated with a material consisting of a mixture of epoxy resins. On the lower part (place of grip with the palm) there is a "cover" made of transparent rubber. First it is heated, then put on a handle and cooled with compressed air. This method is called hot pressing, and thanks to it, a free space remains between the metal and rubber - an air cushion that absorbs vibrations from impacts. On the top of the cover there is a corrugation: the hammer does not slip out of the hands during operation.

SUMMARY: beautiful and original design. The metal handle can be seen through the transparent rubber. The air cushion between them "eats" the recoil, preventing the palm from getting tired ahead of time. The sharpened edges of the nailer make it a dangerous enemy of even deep-seated nails, and hardening gives it the necessary strength and resilience.

Habero 600 IH 500

Locksmith hammer

image
image

PURPOSE: locksmith work; hammering and other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; covering - black varnish; hardening of working surfaces. Main firing pin: square.

HANDLE: material - hickory; protective clip.

WEIGHT: head - 500 g.

FEATURES: ring wedge; safety plate to protect the attachment point; notches in the handle for a comfortable grip.

MANUFACTURER'S RANGE: Red Ribbon Plus series (locksmith hammers with ash or hickory handles and heads weighing from 100 to 2000 g); spare parts (protective clips, safety plates, screws, ring wedges); other series of hammers.

CONSUMER ANALYSIS

The Habero plant is one of the most famous in Europe and is known as the place for the production of hammers, sledge hammers, chisels and other hand tools. The most innovative model to date is the 600 IH, which is part of the Red Ribbon Plus series.

If you are puzzled by counting the details of a "primitive" hammer, most often there are three of them. But the 600 IH is surprising: it consists of six parts, moreover, "fully" functional (it is not even clear how other hammers do without them).

The head (first part) is made of chrome vanadium special steel and coated with a black moisture-resistant varnish. High hardness is the key to its safety: it avoids dents on the surface. When colliding with more durable metal, the striker (striking part) does not flatten. This will not happen also because the edges of the working edges of the striker are hardened in a special way. The result of such processing is long-term preservation and the absence of unpleasant surprises, for example, chips on the metal. This is not good for the tool, and it is dangerous for the employee.

"Shank" 600 IH 500 is made from hickory. The material (in another way - American walnut) compares favorably with the fact that the handle made of it, if it does crack, is safe - always along the fibers, and not across. Another great feature of the hickory grip is that it dampens vibration from impact - there is almost no recoil to the hand.

The third part is an annular wedge, which is a conical sleeve. It is screwed to the handle by the fourth element - a long screw, through a metal plate (the fifth part of the hammer, its function is to protect the attachment point from moisture). Consequently, the metal head will not come off, and the health of the master is out of danger. The screw is screwed into the depth of the handle perpendicular to the head. Among other things, the wedge provides a high and uniform spacer load.

And finally, the sixth and last component is a hardened safety clip. These are the "armor" of the handle. The clip protects the "handle" in the most "dangerous" place - where unwanted blows are frequent, namely directly under the head. As a result, the risk of cracks and faults appearing here is practically reduced to naught.

SUMMARY: The hammer consists of six parts, essential and functional. All of them are securely fixed and regularly perform their discreet work. The guarantees of a long period of "working life" are induction hardening of the striker edges and a safety clip, and the guarantee of the master's safety is the hickory handle. In short, a serious model for the "advanced" user.

Kapriol 10360

Locksmith hammer

image
image

PURPOSE: locksmith work; hammering and other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; covering - black varnish; hardening of working surfaces. Main firing pin: square.

HANDLE: material - hickory; safety clip.

WEIGHT: hammer - 300 g.

FEATURES: epoxy resin coating; non-slip grip cover.

MANUFACTURER'S RANGE: Locksmith and joiner's hammers with handles made of wood (ash, beech, hickory), fiberglass or steel; carpentry hammers; roofer hammers; other models.

CONSUMER ANALYSIS

The "correct" hammer head is not only a guarantee of a long "life" of the instrument, but also a guarantee of the safety of the master's health. The quality and special treatment of the steel makes the tool durable and safe. In addition, the "striking" part undergoes a special thermal hardening, and uneven: the strikers must be harder, the "space" between them - softer, in order, to put it simply, spring. Then the head will not split from strong blows. It is coated with a black varnish to prevent corrosion.

Equally important is the high quality of the handle. It takes good stuff to provide it; the Kapriol hammer has a hickory. A handle made of American walnut (the second name of this type of wood) rarely breaks, and if this happens, then only along the grain. Taking care that the tool was comfortable, the manufacturers gave the "handle" a shape that takes into account the structure of the palm.

The third part is a plastic safety clip that protects the handle in case of accidental blows. It is in the "risk zone" - directly under the head. Wooden handles often break at this point. With a collar, the danger is much less.

To keep the wedge in place, it is poured over with epoxy glue.

SUMMARY: The Kapriol hammer is designed for heavy loads, therefore it is "addressed" to professionals, however, even in domestic conditions, its safety margin will be useful. A comfortable, non-slip hickory handle with a plastic safety clip and a well-crafted head make it long-lasting and safe for humans.

Kraftool 20270

Joiner's claw hammer

image
image

PURPOSE: hammering and extraction of nails; other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - special steel; technology - forging; surface polishing; hardening of working surfaces. Striker: round.

HANDLE: material - steel; rubber pad.

WEIGHT: hammer - 600 g.

FEATURES: all-metal construction; grooved surface of the rubber pad.

CONSUMER ANALYSIS

It is rarely possible to combine proper weight and elegance in a professional "tool of labor". In this model, this combination has been successfully achieved.

The working surfaces of the steel head (firing pin and the edges of the nailer) are induction hardened. The "cover", which covers the metal of the handle, not only prevents the hammer from slipping out of the palm with an energetic blow, but also "suppresses" the vibration of the instrument at the moment of meeting with the material. The damping properties of the pad are provided by a special plastic, and the grip reliability is provided with corrugation.

The word "stylish" fits perfectly with the Kraftool hammer: both the plastic coating and the rounded shape of the head - everything works not only for convenience, but also for the image.

The model is capable of solving not only carpentry, but also locksmith "questions". The reliability of the tool fully allows for such an increase in the intensity of labor activity. Let us also note the hammer's ability to perform "reverse" work, that is, to bring out the "hammered".

SUMMARY: a handy hammer made from a solid metal billet, the strength and reliability of which are guaranteed by the quality of steel. The appearance is also pleasant. The main scope of work is carpentry.

Matrix 10330

Locksmith hammer

image
image

PURPOSE: locksmith work; hammering and other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; covering - black varnish; hardening of working surfaces; head length - 120 mm. Main firing pin: square.

HANDLE: material - fiberglass; safety clip; rubber pad; handle length - 325 mm.

WEIGHT: head - 500 g.

FEATURES: Ribbed rubber pad.

MANUFACTURER'S ASSORTMENT: locksmith hammers with fiberglass handle (head weight from 100 to 1500 g); carpentry hammers with wooden, metal or fiberglass handles; bricklayer's hammers of various types; roofer hammers; many other models.

CONSUMER ANALYSIS

The 10330th "Matrix" is comfortable, reliable, weighty - it fully meets the "hammer" quality standards. The steel head is hardened at the ends. Due to this, the strikers (square main and sharp additional) in the process of processing become stronger than the middle of the part - the tool springs where the "solid hardened" would crumble.

The metal part is hidden under black varnish: the color is noble and the part will not rust. The impact surfaces are only polished, which is quite justified: which coating will withstand direct impacts?

The hollow handle is made of fiberglass, a very durable material. It is also good because it does not dry out, does not swell from moisture, so the tool is not picky about weather conditions: it is safe to store it anywhere. By cutting the handle across, we get an oval. Such a profile is more reliable and is able to withstand loads that are dangerous for a circular section. In the place of the grip, a rubber cover was "placed" under the palm: pleasant to the touch, it perfectly dampens vibrations during active work.

The rubber ring under the head is a safety clip that protects the handle from "injury" in case of accidental impacts with this place on the nail. Fiberglass is stronger than wood, but it is better not to expose it to unnecessary troubles. In addition, the clip emphasizes the "progressive" design of the product.

SUMMARY: A robust fiberglass handle, a properly hardened high-quality steel head, and a safety clip that protects the handle make the Matrix a reliable and durable hammer. And to make it convenient for them to work, the handle is covered with non-slip and vibration-damping rubber.

Practa 300-711031

Locksmith hammer

image
image

PURPOSE: locksmith work; hammering and other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; covering - black varnish; hardening of working surfaces. Main firing pin: square.

HANDLE: material - ash; coating - varnish; handle length - 300 mm.

WEIGHT: head - 300 g.

FEATURES: ring wedge; covering the grip area with red varnish.

MANUFACTURER'S RANGE: many models for various purposes.

CONSUMER ANALYSIS

The hammer could be called "twice three hundred": both the mass of the "striking" part and the length of the handle are equal to three hundred (the first - grams, the second - millimeters).

The designers did not limit themselves to choosing a high-quality material for the head, deciding to subject it to hardening as well. This increased the already considerable endurance of the part.

The hammer needs more than just mechanical resistance. The function of chemical protection, as in the case of the handle, is performed by a varnish coating, only for metal the "transparent" color was changed to solid black. Only the striking surfaces shine by grinding: flat for hammering in nails, and sharp for a cleaver. This is understandable: the varnish would have chipped off on them anyway, so it was carefully grinded off during production.

The impregnation for the wooden handle was selected as colorless - transparent. The red paint marks out the palm contact area on the ash part.

The ring wedge is responsible for the reliable "connection" of the two parts. This inconspicuous "worker" evenly spreads the entire inner surface of the upper end of the handle, and he flies out with much less eagerness than his flat counterpart.

SUMMARY: The Prasta hammer will fit well into both the amateur and professional "arsenal". It is made technologically, therefore it is convenient (fits snugly in the palm) and reliable.

RemoСolor 38-3-304

Carpenter's hammer

image
image

PURPOSE: hammering in nails; other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; surface polishing; hardening of working surfaces. Striker: round.

HANDLE: material - steel; cover - chrome; rubber pad.

WEIGHT: head - 450 g.

FEATURES: Ribbed rubber pad.

PRODUCER'S RANGE: locksmith hammers with square or round striker, with wooden, metal or fiberglass handle; carpentry hammers with wooden, metal or fiberglass handles; carpentry hammers; other models.

CONSUMER ANALYSIS

The RemoColor hammer is good in quality and shape. The head is forged from "correct" tool steel and completely polished. The striker and nailer have been hardened. This complicated process makes the "elasticity" of the head more in some places and less in others. The hardness of the impact surface is higher, which eliminates the appearance of burrs and dents during operation: neither aesthetics nor safety will suffer. Once hardened, the nailer is resilient enough not to break, and at the same time remains firm. The sharpened ends easily pry off deep-seated caps.

The handle of the hammer is also steel; it is protected from corrosion by a chrome coating. Oval in cross section, it is a stronger lever than a simple round one. And to soften the impact, and reliably grip the product helps the rubber "cover", put on the metal. For greater convenience, the surface of the pad is corrugated - the hammer will not slide even in a sweaty palm.

The handle and the head are connected by pressing the first into the second. It is difficult to imagine a more reliable fastening of these parts. It can be seen that the instrument is prepared for any load and it is difficult to "scare" it with hard work.

SUMMARY: the steel handle, firmly connected to the head, as well as the hardening of the striker and nailer make the hammer a durable "hard worker". Comfortable for hands - rubber pad securely fixed in place of grip. Its grooved surface protects the hand from vibration and eliminates unnecessary effort to hold the tool.

Stanley Steelmaster 51031

Joiner's claw hammer

image
image

PURPOSE: hammering and extraction of nails; other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; covering - black varnish; hardening of working surfaces. Striker: round.

HANDLE: material - steel; rubber pad.

WEIGHT: head - 450 g.

FEATURES: tubular seamless handle; finger recesses on the rubber pad.

MANUFACTURER'S RANGE: carpentry hammers-nail pullers (head weight 450 or 570 g); locksmith hammers; many other models.

CONSUMER ANALYSIS

All Stanley hammer heads are made from fine-grained rolled carbon steel (EN9). The advantage of the material is the reduced amount of impurities, which leads to two logical consequences - an increase in the reliability of the tool and the safety of the user.

The secret of the high strength of the head lies in the use of the forging method for its production. When a part is not "forged", but simply cast into a shape, then over time various troubles are not excluded, for example, scattering when small pieces of metal are hit.

Directly working surfaces of the "head" are heat-treated in a special way (differently than all the remaining metal parts) - the hammer does not face "loss of shape" for many years. Briefly about "point" hardening: the impact plane of the striker (butt end) is heated to a certain temperature, and then sharply cooled in water. They do the same with a nail puller, only oil takes the place of water. This method gives the material the special plasticity necessary to resist the stresses that arise during the extraction of nails. In addition to increasing the strength, all these procedures allow for a long time to "fix" the appearance of the product - neither dents nor chips are formed.

The "appearance" of the nail puller is also worthy of attention, but not only for its attractive appearance. The shape of the bend, stretching from its edge almost to the striker, makes it possible to extract nails with less effort than in samples whose roundness is observed only to the middle of the head (to the location of the wedge). Thanks to the long support surface of the Stanley Steelmaster, the pliers will be needed much less often, as long enough nails can be removed. The grips have double sharpening (top and bottom), so the fasteners are pulled out with the entire plane of the cutout, without fear of chips on the edges. Removing several nails at once is not a problem either. Often a "simple" tool gives in to small fasteners with tiny caps. Steelmaster is at a height here too - the section of the edges is such that it allows you to grab the slightest ledge.

As a rule, the "extractor" wears out in one place, while others, due to geometry, cannot be used. Stanley's shape is such that the load, even when pulling out the same nails, does not fall on the same place. The entire inner surface works alternately, which is unlikely to grind off in the foreseeable future.

A hollow metal handle is made smooth, and there are no seams on its surface (the scientific name for the production method is extrusion). The durability of this part directly depends on its shape. The handle, round in diameter, can deform under heavy loads. Stanley has it oval; the rigidity of this shape is higher.

Obviously, you cannot hold the instrument behind the metal surface - a vinyl cover is put on the "pipe". It is pressed onto parts, and a special "thermo-controlled" glue, using a special technology, reliably adheres two materials.

An interesting method of connecting two metal elements - the head and the handle. First, a hole is drilled in the first according to the shapes of the second with the required tolerances, and then, using a five-ton press, the handle is pressed into this hole. The hammer, assembled in this way, "without wrinkling", can withstand an impressive axial load.

SUMMARY: The tool is reliable and safe. Its qualities will be appreciated by professionals. Also suitable for locksmithing work, it will withstand any test that may fall to the lot of the shock worker. The key to strength is the metal of the handle and induction hardening of the working parts, and the comfortable vinyl handle allows you to effectively use the potential of the product.

Stayer 450 g

Joiner's claw hammer

image
image

PURPOSE: hammering and extraction of nails; other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - special steel; technology - forging; hardening of working surfaces. Striker: round.

HANDLE: material - fiberglass (fiberglass); rubber pad.

WEIGHT: head - 450 g.

FEATURES: Finger grooves on rubber pad.

MANUFACTURER'S ASSORTMENT: carpentry hammers-nails; locksmith hammers.

CONSUMER ANALYSIS

The hammer is called carpentry, but the quality of the steel from which it is made (improved high-carbon) does not exclude its use as a locksmith. The target audience is both amateurs and professionals. The "predisposition" to carpentry gives the very appearance of the product.

Both working surfaces - both the one with which they beat and the one with which the clogged is removed - are induction hardened. After it, the resistance of the metal to the formation of dents and chips increases many times.

The good thing about the fiberglass handle is that, unlike wood and metal, it does not rot or rust: fiberglass is not afraid of contact with moisture. There is a non-slip rubber pad where the hammer contacts the palm. For greater convenience, it has grooves for the fingers. The second function of the rubber is to reduce vibration transmitted to the palm during impacts. With this kind of care for your hands, tireless work lasts much longer.

SUMMARY: high-quality materials, their strong joining and non-trivial design are the key to the convenience, reliability and durability of this hammer. Anti-slip rubber on the handle is an important detail: the palm does not slip and is less prone to kickback.

Wiha 800-02094-1

Straightening hammer with replaceable strikers

image
image

PURPOSE: straightening, body work, etc.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; hollow structure (filler made of metal shavings). Fins: replaceable; round; hardness - medium; material - polyurethane (yellow strikers) or superpolyurethane (anthracite colored strikers).

HANDLE: material - hickory; safety clip.

WEIGHT: hammer - 580 g.

FEATURES: the ability to change strikers; non-slip grip surface.

MANUFACTURER'S RANGE: leveling hammers without recoil with a wooden or metal handle; spare parts (handles, replaceable strikers); hammers and sledge hammers with replaceable square strikers.

CONSUMER ANALYSIS

The design of Wiha hammers is more than original. To begin with, the tool head is hollow inside. It is filled with 80-90% filler - metal shavings. Such a system significantly dampens recoil on impact, and also neutralizes vibration. Such a tool is indispensable for large volumes of work: after working a shift, you appreciate it. By the way, such hammers spare not only hands, but also the surface to be treated, because the head does not bounce off the part.

Another unique feature is the interchangeable strikers. They are of two types and differ in hardness: yellow (from polyurethane) - "softer", black (from superpolyurethane) - "harder". The first ones are designed for gentle blows, the second ones - for "hard" work. Both those and others are screwed to the ends of the head. The Wiha 800-02094-1 package includes two strikers of each type.

The upper part of the handle is ready for "wrong" hits: a protective clip is put on the "handle" under the head, secured with a screw for reliability. Now a miss, leading to a hit on the workpiece with the handle, is less dangerous for the tool.

The hammer has a hickory handle. As a result, it practically does not slip in the palm of your hand, but most importantly, it is safe: if it breaks, the crack will only stretch along the fibers (that is, along the handle). Modifications with a metal "handle" are also possible; during assembly, they are "covered" with a black rubber "cover" with a corrugated surface.

SUMMARY: purely professional model. It is interesting with an unusual device: the head is hollow inside and is not completely filled with metal shavings - there is practically no recoil during impacts. It is not surprising that the hammer is called gentle. In addition, different surfaces are processed with the same tool, since the strikers are replaceable: the master "adjusts" the hardness of the working surface according to the circumstances.

Craton 2-15-01-07

Locksmith hammer

image
image

PURPOSE: locksmith work; hammering and other carpentry work.

TECHNICAL SPECIFICATIONS

HEAD: material - steel; technology - forging; covering - black varnish; hardening of working surfaces. Main firing pin: square.

HANDLE: material - fiberglass (fiberglass); safety clip; rubber pad.

WEIGHT: head - 500 g.

FEATURES: Ribbed rubber pad.

MANUFACTURER'S ASSORTMENT: carpentry hammers-nails with a metal handle; wood-handled carpentry hammers; locksmith hammers with wooden or fiberglass handles; bricklayer's hammers; other models.

CONSUMER ANALYSIS

Forging, durable anti-corrosion coating and hardening of the working surfaces make the head of this hammer durable and "ageless".

Products with a fiberglass handle are highly durable. Kraton is no exception. Fiberglass serves for a long time, without breaking where wood cannot withstand.

The rubber "cover" not only reduces the coefficient of friction in the palm-hammer system, but also dampens vibrations from shocks. As a result, the hand gets tired much less.

The head is attached to the handle using epoxy resins. This connection is as strong as the fiberglass itself. The details hold on to each other with a "stranglehold".

The protective clip is a useful addition. It is located on the top of the handle, directly under the head, and protects the structure from harmful impacts. Without a clip, with careless handling, the fiberglass may not break, but the outer gloss will clearly lose.

SUMMARY: "Kraton" is a reliable hammer and will not fail in difficult situations. It keeps "good shape" for a long time thanks to "correct" materials and technological processing. Convenience of work is the result of non-trivial design solutions.

Recommended: