DIY Shower Cabin

DIY Shower Cabin
DIY Shower Cabin

Video: DIY Shower Cabin

Video: DIY Shower Cabin
Video: How to Build a Walk-In Shower (Part 1: Wedi Shower Pan Install) 2023, May
Anonim

It's nice if the shower is comfortable and beautiful. It is not at all difficult to make it yourself if you have the time, material, tools and desire. Shower cabins with a flat base or a simple floor drain are convenient for children and the elderly and are easy to clean. And the bathroom looks more spacious.

Image
Image

Shower cabin with an inclined floor.

When planning a bathroom, remember that in some cases it is better not to use shower trays, but to make a shower cabin with an inclined floor. So, for example, showers are arranged in gyms or fitness centers. Similar shower cabins can be equipped at home. In order to install a drain (experts call it a ladder), you first need to make a depression in the floor.

Before laying the facing tiles, it is necessary to tightly insulate the ceiling, reliably protecting it from water penetration. The tiles should be installed with a slight slope down to the drain hole, which will prevent the formation of puddles and stagnation of water on the floor of the shower stall. If you decide to do it yourself, be sure to consult a specialist.

Performing such work requires certain skills and knowledge. An experienced specialist will tell you where to start and what tools are best to use.

Comment:

- the inclined floor of the shower stall will facilitate its cleaning;

- you will not stumble;

- a shower cubicle can be made in such a size that your bathroom will allow;

- the highest point is the junction with the bathroom floor; the lowest point is the drain.

Flat shower trays in the floor.

When constructing a shower stall without steps, you can choose a flat shower tray with low sides. To install a shower tray, you first need to prepare a platform for it by hollowing out a recess of the required shape and size in the cement floor screed.

Then you need to determine the location of the drain. It depends on where the drain is located on the pallet. Installation itself - the process is quite simple: the pallet is equipped with adjustable feet. When installing the shower tray, be sure to consider the thickness and level of the bathroom floor that will be adjacent to it. After the bathroom floor has been laid, the pallet joint can be edged using a special border. The surface of the sump should have a slight slope, necessary for the smooth flow of water.

Comment:

- fast assembly thanks to a set of prefabricated parts:

- the shower tray is easy to install thanks to the adjustable legs;

- together with the pallet, you need to buy a low border, framing it around the perimeter;

- cabins with pallets have the advantage that they do not require during the assembly those sanitary and hygienic products that are necessary for cabins with an inclined floor and seams between.

Image
Image

Option 1.

The shower stall floor is flush with the bathroom floor. In this case, a ladder is used.

Image
Image

Option 2.

In this case, a shower cabin was designed with a tray recessed into the bathroom floor.

Image
Image

Drain connection diagram in case of using a drain, option 1.

Image
Image

Sump drain connection diagram for option 2.

We install the shower tray.

Almost any home craftsman can install a shower tray on his own, having previously correctly prepared a platform for it. Shower trays are usually sold complete with the parts required to install it.

Before starting the installation work, check: whether the angle of joining the walls of the shower stall is 90 "; whether the edge of the pallet will fit snugly against the walls; whether the socket of the sewer pipe matches the drain in the pallet. It is better to immediately attach the lower part of the structure to the drain pipe.

Image
Image

1. Attach the adjustable feet to the bottom of the pallet by placing pre-cut pieces of cardboard under each.

Image
Image

2. Use a hammer and chisel to grind the surfaces so that they are not sharp before positioning the pallet in the floor recess.

Image
Image

3. With ordinary ceramic tiles, you can easily check whether the room angle is 90 °.

Image
Image

4. If the corner is not straight, line the wall at the height of the pallet so that the edges are firmly attached to the wall.

Image
Image

5. Fit the sewer pipes so that when installing the pallet, the funnel of the sewer opening is exactly under the drain.

Image
Image

6. The pallet is positioned exactly horizontally by means of adjustable feet. Be careful not to scratch the surface of the pallet!

"Curtains" for your shower stall.

The shower cubicle can be purchased in whole or in parts, combining them at your discretion. It all depends on your desire, skill and imagination. You can install the pallet yourself and lay out the walls with ceramic tiles, buy ready-made transparent walls and assemble them yourself.

Modern manufacturers offer a fairly wide selection of shower cabin designs. They may differ from each other in the way of opening the sash, design, installation method, materials. For the manufacture of sections, glass, fiberglass, various plastics are used. The variety of choice is also due to the fact that goods are offered by a large number of manufacturing companies representing both already well-known brands and those that have appeared on the Ukrainian market quite recently.

The combination of structural and quality characteristics determines the price of shower cabins and their components. If you decide to assemble a shower enclosure from separate components, take into account that it can be located either in the corner of the bathroom, or adjacent to one of the walls. You will also need tools and materials that you may find in your home: a drill with drills, a screwdriver, screws, cement.

As a rule, a set of shower walls consists of several sections (there are one-, two- and three-section sets). The sections are movably connected to each other, which allows rational use of the bathroom space.

Kits are available in a variety of designs. Some sections are made of solid glass or plastic, while others are made up of multiple vertical strips. There are sets of frosted and corrugated glass. There are interesting models on sale, which are a set of corrugated stripes alternating with transparent ones. Frosted glass with a pattern looks very original. The kits differ in both the height of the sections (from 1 m 40 cm to 1 m 90 cm) and their total length (from 140 cm to 170 cm), which ultimately determines the size of the booth.

So, you can always make a choice that suits your aesthetic tastes, structural and installation conditions and financial capabilities. Thus, it is quite possible to find an acceptable option and successfully implement your ideas.

Image
Image

1. Place the wall profile on the edge of the pallet; using a spirit level, set it exactly vertically; use a pencil to mark the drilling locations on the tile

Image
Image

2. Punch the top surface of the tile with a center punch where you are drilling. The punches on the center punch must be done carefully so as not to damage the enamel.

Image
Image

3. To avoid splitting the tiles, do not use the hammer function of the drill at the drilling site until the drill has gone through the entire thickness of the cladding.

Image
Image

4. Having drilled the holes to a depth corresponding to the size of the dowel, you can screw on the wall profile.

Image
Image

5. Install fixed walls by hinging the glass. It is important not to pinch the screws to avoid cracking the glass.

Image
Image

6. Before fixing the walls, you need to hang the doors and adjust the hinges. With the doors closed, the seal should fit snugly against the edge of the pallet.

Popular by topic