Sauna In Every Apartment

Sauna In Every Apartment
Sauna In Every Apartment

Video: Sauna In Every Apartment

Video: Sauna In Every Apartment
Video: САУНА В КВАРТИРЕ! Russian bath, sauna in the apartment! 2023, June

Sauna can be arranged in absolutely any apartment or cottage. The smallest commercially available Finnish saunas have dimensions in terms of no more than 0.8 * 0.8 m. The height of home saunas usually does not exceed 2.1 m. An arrangement of saunas and steam rooms is possible on the balcony, in the bathroom, pantry, in the bathroom …


Measure seven times, or the benefits of technical calculations

The sauna cabin is an inverted glass structure that is installed on a floor covered with ceramic tiles or, more rarely, wood. The base / plinth is usually made of anodized aluminum and is a frame structure. The plinth can also be made of a wooden block, necessarily treated against decay with Tikurilla antiseptics, which prevent moisture from passing between the floor and the wall. The structure of the walls is usually a two-layer panel with effective thermal insulation, the paneling of the panel is “SUPER” class euro lining made of linden, aspen, North American spruce, abachi (South Africa), cedar, pine. Insulation URSA, ISOVER or mineral wool produced at the ZapSibgazprom plant; vapor barrier - aluminum foil 0.068 mm thick. Walls are sometimes made from one piece,a carefully processed and polished bar (solid wood), with a section from 50 x 100 to 75 x 150 mm, laid “in a paw”. The design of the ceilings is similar to that of the walls.

The shelves are usually made of African abachi wood, which has a unique property - not to heat up: at a sauna temperature of 90-110 ° C, its surface temperature is no more than 40 ° C. Supports for walls of a special design are made of abachi, less often of linden. The design and shape of the backrest create the best conditions for resting the whole body. It is necessary to use elegantly carved ceiling and corner cornices with a special profile. The waterproof heat-resistant lamps are covered with special decorative wooden shades that create a special feeling of peace in the sauna. The frame of the bench is assembled on special dowels and is designed for maximum loads and durability. Nails or screws are buried below the level of the seat surface and closed with plugs. The hatches for air supply and outlet are closed with decorative grilles and are calculated according to the laws of aerodynamics.

For the glazing of the sauna windows and doors, double-glazed windows with double tinted glazing are used. The thickness of the walls can be easily calculated according to the formulas of Construction Norms and Regulations "Construction Heat Engineering" and classical thermodynamics. The optimum thickness of the effective insulation layer should not exceed 50 mm.

Particular attention must be paid to the design of the ventilation system in the steam room or sauna. There are several approaches to ventilation of saunas, but all of them are based on natural air exchange due to the difference in pressure of the air columns of the incoming and outgoing air streams. One of the sauna ventilation schemes (the concept of the Finnish company “Saunatek”) is shown in fig. 2. Firms "Harvia", "Finleo" and "Tilo" use slightly different approaches in their development.

An important issue in the process of designing saunas is the correct choice of the power of the heater-heater. In recent years, electric heaters-heaters made in Finland ("Harvia", "Saunatek", "Hello", "Castor", "Viki"), Germany ("Finleo"), Sweden ("Tilo"), Russia ("Heat", "Perm", "Miass", Tyumen Medical Equipment Plant). Our calculations allowed us to develop a table for choosing the optimal power of the heater-stove (see table), depending on the influence of external factors. The stove must be properly loaded with stones of a certain rock, the coefficient of linear expansion of which is zero (diabase, pereotite, talc-chlorite), preferably from the manufacturer of the stove. It is forbidden to use other types of stones, because when heated they expand and thereby destroy the electric heating elements and the furnace body.

What are saunas made of?

For the construction of saunas and steam rooms, it is necessary to use only high-quality materials that undergo special training (drying to a moisture content of at least 8%, processing on woodworking machines with an increased speed, surface grinding). The following materials are used for euro lining, shelves, flooring, back supports.

Linden is a light wood, easy to process, has excellent properties, does not emit resin. When heated, it emits a fragrant smell of linden honey.

Aspen - comes in various color shades. Resin free, highly resistant to moisture and pleasant scent. Exceptionally suitable for steam room equipment.

Spruce is a light-colored wood used for walls and ceilings. The tree has healthy knots and a neutral odor, a slight release of resin.

Cedar is a fragrant and beautiful multi-colored valuable tree. No knots and no resin. Suitable for walls and ceilings.

Pine is a fragrant tree rich in knots and resin. The surface is smooth and beautiful, with time it takes on a noble appearance. Exceptionally suitable for walls and ceilings.

Abachi is a very soft tree without resin and knots. Often used in sauna equipment.

Mazonite - pressed wood shavings for invisible parts of walls and ceilings. Economical and environmentally friendly material.

The wood surface is processed:

  • linseed oil (Tikurilla firm) - threshold, steps, wooden flooring (floor), floor elevations; oil ("Sassu Sauna" or "Supi Sauna" by "Tikurilla") - benches, backs, armrests and decorative inter-bench panels, shelves, sometimes vertical wall surfaces. The treatment is carried out in order to preserve the wood's original properties and provides the possibility of cleaning and maintenance.

Track Tips

The calculations and design experience of professionals show that the following recommendations should be observed when building saunas and steam rooms.

The thickness of the effective insulation layer should be 50 mm.

The insulation from the inner surface must be insulated with a vapor barrier made of aluminum foil. It is advisable to use insulation with a foil layer of the URSA type.

An air gap of up to 10 mm must be created between the inner layer of insulation, covered with a layer of foil, and the inner layer of the lining.

All materials for building a sauna must be pre-dried to a moisture content of at least 8%.

The power of heating devices (heaters) is selected depending on the volume of the steam room and corresponds to: approximately 1 kW of heating element power - 1 m3 of air.

It is necessary to correctly design and arrange ventilation in the sauna or steam room, otherwise the oxygen in the air will burn out, which will lead to dangerous consequences for humans and the combustion of the sauna.

It is best to contact a specialized organization for the design and construction of a sauna.

Popular by topic